| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 40/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The touchless lavatory faucet RJY-11-B123.1/2/3AD has three colors option. They are chrome, white and black. These three touchless faucets use active infrared sensor technology that allows starting the flow of water without touching the faucet. When you put your hands near the faucet spout, the water starts flowing automatically. When your hands leave, the water stops. Or waiting after the setting time, normally 60 seconds and the water automatically stops.
The infrared sensor is nearby the spout that can not be easily found. This faucet sensor has patented astigmatism technology, effectively solves mirror reflection. The stainless steel water hose is directly connected to the faucet spout with eco-friendly waterways, which meet international standards.
A touchless faucet uses active infrared sensor technology that allows you to start the flow of water without touching the faucet. Instead, just place your hand to the sensor, the faucet will start water flowing, and the water will stop when you take your hand away. If you forget to close the no-touch faucet, the sensor IC and program will control the water to stop automatically after 1min continuously flowing, and this timing can be tailor-made and set by a remote controller.
The infrared sensor is nearby the spout that can not be easily found. This faucet sensor has patented astigmatism technology, which will avoid faucet malfunctions. Why? for regular sensor faucets, if the basin is too small or the sensor is too close to the basins, the sensor faucet will detect the basin and automatically start flowing. However, with our patented astigmatism technology, the faucet sensor will automatically shorten the sensor distance and avoid the malfunctions described above.
* Touchless automatic sensor With microcomputer smart sensor technology, water will automatically flow out when hands enter into the sensing range, and the water stops automatically after hands leave, which is convenient and hygiene.
* Water saving Water stops automatically after 1min continuous flow. This water efficient faucet reduces overall water usage without sacrificing water, which saves water than regular manual faucet and can effectively save 65% of water.
* Energy saving Batteries shall last approximately 3000 times/month for two years.
* Low power indication When the battery is exhausted, the indicator light flashes and the faucet will no longer discharge water, which may indicate it is time to replace existing batteries with new ones or there is not enough power.
* Healthy and Safe With touch-free faucet for the basin, it can prevent the spread of bacteria and germs. It's not only time-saving but also hygienic.
The faucet comes with brass material which is durable and eco-friendly, easy to clean and shiny. It is working with Rajeyn's compact faucet control box RJY-K09 as below.
A sensor faucet control box is a square box that sits or mounted underneath the sink as part of a typical sensor faucet installation process. The control box is like a hub which enables water to flow IN (from main water supply) and OUT (to sensor faucet).
Most of our sensor faucets range come with a control box, except our 2-IN-1 series sensor mixer for cold and hot water, such as RJY-11-B201D and RJY-11-B204D. Rajeyn has different control boxes for both basin and kitchen faucets.
Step 1: Fix faucet body to the basin with nuts and gaskets.
Step 2: Drill two holes in wall and fix control box under the basin.
Step 3: Connect faucet water hose to the control box.
Step 4: Connect sensor wire.
Step 5: Plug adapter to the main power supply.
Important Note
Make sure all the wires are well connected.
Make sure the batteries are installed correctly.
| Technical Parameters | |
| Working power | DC3V & AC220V |
| Average static power consumption | <50uA |
| Instant dynamic power consumption | <2.5W |
| Working water pressure | 7.25-101.5PSI (0.05-0.7MPa) |
| Sensor distance | 10-30cm |
| Error detection time | <0.6 second |
| Maximum washing period | 60 seconds (Default) |
| Water flow | 4L/min at 0.1mpa 9L/Min at 0.4mpa |
| Environment temperature | 34°F-104°F (1~40ºC) |
| Medium temperature | 32°F - 149°F (0~65ºC) |
| Inlet diameter | G1/2" |
| Outlet diameter | G1/2" |
| Package Information | |
| Inner package | 380*170*113mm |
| Outer package | 525*395*360mm |
| Quantity per carton | 9pcs |
){kind=link}